In the following tutorial we used Snow Leopard build 10A432 GM release (now confirmed that retail disc is build 10A432). Snow Leopard needs a Leopard Install so we need to two hard disk one with Leopard already installed and second hard disk for Snow Leopard. Also you need to download some files needed during the installation so download the files given below. We’ll update these files regularly when the new updates will available.
- Tools Download Here
- Kexts Download Here
- Chameleon 2.0 + EFI 10 Download Here
- Chameleon 1.0 + EFI 10 Download Here
- Misc Download Here
- Mac OS X 10.6 Snow leopard (Google is Your F.R.I.E.N.D.)
Step One). Connect both of your Hard Disk one is blank and one is pre loaded with Leopard (10.5.X) already. Boot in to Leopard and launch Disk Utility to partition your second hard-disk with GUID partition scheme. Name the partition what ever you want in this tutorial we assumed Snow.
Step Two). Mount the Snow Leopard DMG File, an installer window will appear here click on the free space anywhere in windows then press CMD + Shift + G . A little window will appear in the top of existing window in this little window type “Mac OS X Install DVD/System/Installation/Packages/” without quotes as given in image below and press Go.
Step Three). In the next window find the OSInstall.mpkg and double click this package file to start your Snow leopard Installation.
Note : Default OSInstall.mpkg works for GUID partitioned drive only, if you need to install on MBR then google for Modified OSInstall.mpkg for MBR, download modified one and replace with default one.
Step Four). Follow the On Screen instruction and in Destination Select Choose the Snow Partition which you created on a separate blank hard disk.
Step Five). In customization remove the unnecessary languages and Printers. Sit back and have a cup of coffee installation will take 15-25 minutes depending on your hardware. Once Installation finishes don’t reboot and follow the instruction care fully in phase 2.
In the second phase we’ll install Bootloader, some must required Kexts, System Files and Patching the DSDT.
Step One). Open the Chameleon Bootloader Zip you downloaded earlier and install the Chameleon-2-1.0-r431.pkg and then install the Chameleon v2 Snow Leopard Support.pkg (If Snow Support Package Shows an Error Then Follow Step Two) . Make sure to install the both Chameleon packages to Snow Drive (Where you Installed the Snow Leopard). You can change the install location at the third option while Installation in both packages.
( If Chameleon 2.0 + EFI 10 gives you Kernel Panics then reinstall and try Chameleon 1.0 + EFI 10)
Step Two). If you are using PCEFI bootloader on your existing system then Chameleon v2 Snow Leopard Support.pkg will not work for you. In that case you have two options either install the Chameleon-2-1.0-r431.pkg over your current 10.5.X Installation then reboot and do the process again (from Phase One). Or launch the “ShowAllFiles” (included in Tools) and click Show. Then Navigate to the root of your “Snow” Drive and delete the “boot” file you see. and replace it with the boot file included System Downloads (you downloaded earlier). After replacing the boot file again launch the “ShowAllFiles” and click Hide.
Step Three). Now patch your DSDT, launch the DSDT Patcher (Included in Tools) and select Darwin/Mac OS X in Operating System, Select DSDT Patch in options and before hitting the Run DSDT Patcher button make sure to change the destination as Snow Drive (Where you Installed the Snow Leopard).
Step Four). Now put all the “kext file” you downloaded earlier and you can also add yours if you needed into /Snow/Extra/Extensions, and copy the Extensions folder in Extra to the desktop, and drag it over “Kext Utility” which you downloaded. Kext utility will repair your permission and generate a new Extension.mkext. Move that Extensions folder and the extension.mkext back to /Snow/Extra
Step Five). Now launch EFiStudio and look for your Video Card through the drop down menu. Click add device and you will see some alphanumeric numbers, copy these numbers. Add the following code to your com.apple.boot.plist in /Snow/Extra.
Save and Exit…
Step Six). Final Step put the SMBios.plist into /Snow/Extra. Now reboot and enjoy the Snow Leopard…
Disclaimer : All the credits for this article go to iHackintosh. All the instruction and Files are correct in my information. Use this guide on your own risk, we are not responsible for any kind of damage (If Any). Use this guide for experimental purposes only if you likes the Mac then buy a new one